HVAC Services in Burbank, CA

AIRPRO SOLUTIONS provides HVAC services across Burbank, with AC repair, heating repair, installation, and maintenance for homes and businesses, and with the City's permit tiers and Burbank Water and Power electric service in mind.

  • Licensed, bonded & insured
  • 4.8-star rated
  • 24/7 emergency dispatch
  • Residential and commercial
Burbank neighborhood of single-story homes with the San Gabriel foothills behindBurbank, CA Local HVAC service
4.8★Google rating, 40 reviews
C-20California licensed
24/7emergency dispatch
Same-dayservice typical

Quick answer

AIRPRO SOLUTIONS is a licensed HVAC contractor serving Burbank, providing AC repair, heating repair, installation, and maintenance for homes and businesses across the city. Same-day service is typical, subject to capacity, and 24/7 emergency dispatch is available. Call or request service online to schedule a visit.

Local knowledge

Burbank's permit tiers, codes, noise levels, and electric service

Burbank's Building Permits page sorts work into two tiers. Tier 1 covers simple permits for repair and maintenance type work that do not require plan check, and the City says these can generally be obtained over the counter. Tier 2 covers work that needs plan check or zoning approval, such as commercial tenant improvements, additions, new buildings, and accessory dwelling units, and it is submitted electronically through the City's ProjectDox system after contacting Building & Safety. The page lists HVAC changeouts and mechanical ducting among the single-family permits available through Burbank Online Permits, and it names two Tier 1 HVAC scopes that need an energy report: replacing a unit located on the roof or at the rear of the property, and replacing an HVAC system with new ducts or installing a new HVAC system. It also lists mechanical exemptions, including portable cooling units, portable evaporative coolers, and replacing a part that does not change the equipment's approval or make it unsafe, and it says exemptions do not authorize work that violates the code. Which tier applies depends on the scope of the job, so AIRPRO SOLUTIONS confirms the tier and the permit path with the City before work starts, and we do not quote fees.

The City's building codes page says Burbank adopted the 2025 California Building Code with local amendments, effective January 1, 2026. The adopted set it lists includes the California Mechanical, Electrical, and Plumbing Codes, CALGreen, and the Building Energy Efficiency Standards, and it says applications received before noon on December 31, 2025 follow the 2022 codes. The local amendments are in Title 9 of the Municipal Code, which adopts Ordinance No. 25-4,034. We did not find a Burbank reach code on the City pages we read, and we did not read the full text of the local amendments, so we confirm the code edition and any local amendment that applies to your project before work starts.

Burbank's General Plan Noise Element, in Table N-4, lists typical hourly noise levels for stationary sources at exterior spaces: 55 dBA by day (7 a.m. to 10 p.m.) and 45 dBA at night (10 p.m. to 7 a.m.), and 50 dBA by day and 40 dBA at night for tonal, impulsive, repetitive, or speech and music sounds. A footnote says the City may apply stricter or looser standards depending on ambient levels. That table is part of the General Plan, not a Municipal Code limit and not a condenser rating, and we did not confirm how the City applies it to a specific air conditioner. Construction hours in Municipal Code Sec. 9-1-1-105.10, as adopted by Ordinance No. 25-4,034, are 7 a.m. to 7 p.m. Monday to Friday and 8 a.m. to 5 p.m. on Saturday, with no construction work on Sundays and City holidays, and exceptions that include owner-builder and emergency work. We have not confirmed how those hours apply to a particular installation, so ask us about timing for your address.

Burbank had an estimated 102,988 residents on July 1, 2025, and QuickFacts reports a 43.3% owner-occupied housing rate for 2020-2024. SCAG's 2019 Local Profile, using California Department of Finance E-5 data for 2018, counts 44,642 housing units: 44.4% single-family detached, 4.3% attached, 10.6% in buildings of 2 to 4 units, 40.4% in buildings of 5 or more, and 0.3% mobile homes. The same profile reports that 62.9% of housing was built before 1970, citing the U.S. Census American Community Survey, 2017, and Nielsen Co. Those figures are citywide and dated, so we confirm the equipment, roof or attic access, and ductwork at the property, and in a multi-unit building we confirm equipment access and placement. The City's Land Use Element describes the Rancho neighborhood's equestrian character and describes the Media District Commercial designation as a regional employment center of media-oriented and commercial uses, with a Media District Specific Plan adopted in 1991. A Rancho home, an apartment building, and a commercial site each have different access and equipment placement, so we look at each property on its own terms.

Burbank Water and Power (BWP) describes itself as a not-for-profit organization owned by the citizens of Burbank. Its Electrify Your Home page lists a heat pump HVAC rebate for central heat pumps and mini-splits, with conditions that include replacing a gas appliance, no new construction, an application within six months, and first-come, first-served funding that is not guaranteed. BWP's residential rebates page lists rebates for ENERGY STAR room air conditioners and smart thermostats, and its business rebates page lists a catalog that includes package terminal and heat pump HVAC equipment. Programs and funding change, so we link the program pages rather than quote amounts, and confirm your electric provider on your bill before counting on a program. We did not confirm Burbank's gas provider from a service-territory page, so we ask which utility serves the address. For commercial work, we plan rooftop access and equipment placement with the building owner or manager. Official links are in the card for this section.

Burbank permit tiers

Tier 1
Simple repair and maintenance permits with no plan check, generally over the counter
Tier 2
Work needing plan check or zoning approval, submitted through ProjectDox
Energy report (Tier 1)
Roof or rear-of-property unit replacement, and replacement with new ducts or a new HVAC system
Online permits
HVAC changeout and mechanical ducting for single-family homes

From the City's Building Permits page, which shows no update date. We confirm the tier with the City.

Burbank noise levels and work hours

Stationary sources, day
55 dBA typical hourly level (7 a.m. to 10 p.m.)
Stationary sources, night
45 dBA (10 p.m. to 7 a.m.)
Tonal or impulsive, day and night
50 dBA and 40 dBA
Construction hours
7 a.m. to 7 p.m. Monday to Friday, 8 a.m. to 5 p.m. Saturday
Sundays and City holidays
No construction work, with exceptions

Noise Element Table N-4 is a General Plan table, not a Municipal Code limit or a condenser rating. Hours are from Municipal Code Sec. 9-1-1-105.10 (Ordinance No. 25-4,034).

Official Burbank resources

Services in Burbank

Everything we handle for Burbank homes and businesses

Large outdoor AC condenser on a concrete pad beside a stucco wall in warm evening light

AC Repair

Diagnosis and repair for cooling failures, weak airflow, and unusual noises, with the City's published noise levels for stationary equipment in mind.

Learn more
Outdoor AC condenser on a concrete pad beside a home, with the Los Angeles skyline in the distance

AC Installation & Replacement

New system sizing and installation, planned around the City's permit tiers, the energy report scopes it lists, and the 2025 codes.

Learn more
Outdoor AC condenser unit beside a home with a service tool resting on the pad

AC Maintenance

Seasonal AC tune-ups that catch small issues early, for homes and for commercial rooftop and ground units.

Learn more
Gas furnace and ductwork in a home utility closet

Heating Repair

Furnace and heating system diagnosis and repair for Burbank homes and businesses.

Learn more
Modern gas furnace beside an older furnace in a home utility closet with ductwork above

Furnace Installation & Replacement

Furnace sizing and installation, planned around Burbank's permit process. We confirm the permit path with the City first.

Learn more
Outdoor heat pump unit mounted on the exterior wall of a home

Heat Pump Services

Heat pump installation, repair, and maintenance, with Burbank Water and Power's heat pump rebate conditions in mind. Check the program page for current terms.

Learn more
Wall-mounted ductless mini-split indoor unit in a bright living space

Ductless Mini-Split

Ductless systems for additions, converted spaces, and rooms the existing ducts do not reach. Burbank Water and Power also lists mini-splits in its heat pump rebate.

Learn more
Insulated flexible ducts and a galvanized duct plenum in a residential attic

Ductwork Services

Duct repair, sealing, and replacement. The City lists replacement with new ducts as a Tier 1 scope that needs an energy report.

Learn more
Air purifier, return vent grille, and a clean pleated filter in a bright living room

Indoor Air Quality

Filtration, ventilation, and air-quality upgrades for Burbank homes and offices.

Learn more
Outdoor AC unit beside a home at dusk

Emergency HVAC

24/7 emergency dispatch for no-cool and no-heat problems. If you smell gas, leave the building and call 911 or your gas utility.

Learn more

Know before you start

Burbank permits, codes, and incentive programs

Official sources for three local items worth checking before a Burbank HVAC project.

Permit tiers

The City's Building Permits page sorts work into Tier 1 simple permits and Tier 2 permits that need plan check or zoning approval, and it lists two HVAC scopes that need an energy report. Check which tier your project falls in before choosing equipment.

Building Permits page →

Codes

The City's building codes page says Burbank adopted the 2025 California codes with local amendments, effective January 1, 2026. We did not find a Burbank reach code, and we confirm what applies to your project.

Building Codes →

Incentive programs

Your electric provider decides which programs apply. Burbank Water and Power lists a heat pump HVAC rebate, room air conditioner and smart thermostat rebates, and business rebates. Terms and funding change, and we do not quote amounts, so check the current terms before you buy.

Electrify Your Home →

Nearby areas

Also serving the rest of Los Angeles County

AIRPRO SOLUTIONS also serves the surrounding Los Angeles County cities.

Why AIRPRO SOLUTIONS

Licensed, reviewed, and ready across Burbank

AIRPRO SOLUTIONS is licensed in California (LIC #1126691, #50251) and rated 4.8 stars across 40 Google reviews. We explain what we find and what your options are before you decide.

4.8★Google rating
40Google reviews
C-20California license class
24/7Emergency dispatch

Direct answers

Burbank HVAC questions we hear most

Does AIRPRO SOLUTIONS service all of Burbank?

Yes. AIRPRO SOLUTIONS serves homes and businesses across Burbank as part of our Los Angeles County coverage. Burbank's Building & Safety office answers permit questions at (818) 238-5220, so we plan each visit around your specific address.

How fast can a technician reach my Burbank home?

Same-day service is typical in Burbank, subject to capacity. Call (323) 776-9047 to confirm a window for your address.

Do I need a permit to replace an air conditioner in Burbank?

The City lists HVAC replacement as permit work. Its Building Permits page includes HVAC changeouts among the single-family permits available through Burbank Online Permits, and it lists mechanical exemptions such as portable cooling units, portable evaporative coolers, and replacing a part that does not change the equipment's approval or make it unsafe. AIRPRO SOLUTIONS confirms the permit path with the City before work starts, and we do not quote fees.

Which Burbank HVAC replacements need an energy report?

The City lists two Tier 1 scopes. Its Building Permits page says an energy report is required when a unit on the roof or at the rear of the property is replaced, and when an HVAC system is replaced with new ducts or a new HVAC system is installed. We confirm the requirement for your project with the City before work starts.

What is the difference between Tier 1 and Tier 2 permits in Burbank?

Tier 1 is for simple permits with no plan check. The City describes them as repair and maintenance type work and says they can generally be obtained over the counter. Tier 2 is for work that needs plan check or zoning approval, such as commercial tenant improvements, additions, new buildings, and accessory dwelling units, and it is submitted electronically through ProjectDox after contacting Building & Safety. Which tier applies depends on the scope, so we confirm it with the City.

Which building codes apply to a new HVAC project in Burbank?

The 2025 California codes with Burbank's local amendments. The City's building codes page says Burbank adopted the 2025 California Building Code with local amendments, effective January 1, 2026, and that applications received before noon on December 31, 2025 follow the 2022 codes. The local amendments are in Title 9 of the Municipal Code and Ordinance No. 25-4,034. We confirm the edition for your permit with the City.

Does Burbank have a reach code that changes AC replacement?

We did not find a Burbank reach code on the City pages we read, but we did not read the full text of the local amendments in Title 9 of the Municipal Code. We confirm what applies to your project before work starts.

How loud can an outdoor AC unit be in Burbank?

The City publishes noise levels in its General Plan. Table N-4 of the Noise Element lists typical hourly levels for stationary sources at exterior spaces of 55 dBA by day and 45 dBA at night, and 50 and 40 dBA for tonal, impulsive, repetitive, or speech and music sounds. A footnote says the City may apply stricter or looser standards by ambient level. This is a General Plan table, not a Municipal Code limit and not a condenser rating, and we did not confirm how the City applies it to a specific air conditioner.

What hours can HVAC installation work happen in Burbank?

Municipal Code construction hours are 7 a.m. to 7 p.m. Monday to Friday and 8 a.m. to 5 p.m. on Saturday, with no construction work on Sundays and City holidays, and exceptions that include owner-builder and emergency work. They come from Sec. 9-1-1-105.10, adopted by Ordinance No. 25-4,034. We have not confirmed how the hours apply to a particular installation, so ask us about timing for your address.

What about HVAC in Burbank condos and apartment buildings?

Multi-unit buildings add access and placement questions. About 40.4% of Burbank's 44,642 housing units are in buildings of 5 or more units, according to SCAG's 2019 Local Profile using California Department of Finance data for 2018, so we confirm equipment access and placement with the property owner or manager at the address.

Does the age of my Burbank home matter for HVAC?

Age is one factor we check. SCAG's 2019 Local Profile reports that 62.9% of Burbank housing was built before 1970, citing the U.S. Census American Community Survey, 2017, and Nielsen Co. That is a citywide, dated figure, so we confirm the equipment, roof or attic access, and ductwork at your property.

Does Burbank Water and Power offer HVAC rebates?

Burbank Water and Power lists heat pump, room air conditioner, and smart thermostat rebates. Its Electrify Your Home page lists a heat pump HVAC rebate for central heat pumps and mini-splits, and its residential rebates page lists rebates for ENERGY STAR room air conditioners and smart thermostats. The heat pump page says the equipment must replace a gas appliance, new construction does not qualify, and funding is first-come, first-served and not guaranteed. Terms and funding change, and we do not quote amounts, so check the current terms before you buy.

Are there Burbank rebates for commercial HVAC?

Burbank Water and Power lists business rebates. Its business rebates page lists a catalog and custom rebates. The catalog includes package terminal HVAC and heat pump equipment, with amounts in the downloadable catalog. Terms and funding change, so check the current terms before you buy.

Which utility serves my Burbank address?

Your bill answers it. Check which company provides your electric and gas service before counting on a program. We did not confirm Burbank's gas provider from a service-territory page, so we ask which utility serves the address.

What HVAC services are available in Burbank?

AIRPRO SOLUTIONS provides AC repair, AC installation and replacement, AC maintenance, heating repair, furnace installation and replacement, heat pump services, ductless mini-splits, ductwork, indoor air quality, and emergency HVAC throughout Burbank, for both residential and commercial properties.

Is emergency HVAC service available in Burbank?

Yes. AIRPRO SOLUTIONS offers 24/7 emergency dispatch for no-cool and no-heat problems in Burbank. Call (323) 776-9047 and tell us your system is down. If you smell gas, leave the home and call 911 or your gas utility.

How much does HVAC service cost in Burbank?

Cost depends on the problem, the equipment, and how accessible the system is. We do not publish one flat price, so call (323) 776-9047 or request service and we will quote your specific system.

Does AIRPRO SOLUTIONS handle commercial HVAC in Burbank?

Yes. AIRPRO SOLUTIONS services commercial properties in Burbank, including rooftop units. The City's Land Use Element describes the Media District Commercial designation as a regional employment center of media-oriented and commercial uses. Work that needs plan check or zoning approval, such as commercial tenant improvements, follows Tier 2 on the City's Building Permits page, and we confirm the permit path with the City before work starts. See our Commercial HVAC page for the full scope.

Get HVAC service in Burbank

Call or request service online to schedule a visit anywhere in Burbank. Same-day service is typical, subject to capacity.